Senninger's Pressure Regulator

In stock
ITEM#
IV PR-075-L-10-Config
USD$15.3040
Share by email
Product No. Dimension Pressure Flow Range
IV PR-075-L-12 3/4'' 12 0.5-8
IV PR-075-L-15 3/4'' 15 0.5-8
IV PR-075-L-25 3/4'' 25 0.5-8
IV PR-075-L-35 3/4'' 35 0.5-8
IV PR-075-L-10 3/4'' 10 0.5-15
IV PR-075-M-12 3/4'' 12 2-20
IV PR-075-M-15 3/4'' 15 2-20
IV PR-075-M-25 3/4'' 25 2-20
IV PR-075-M-35 3/4'' 35 2-20
IV PR-100-M-35 1'' 35 2-20
IV PR-100-M-50 1'' 50 2-20

Senninger's Low Pressure Regulator is ideal for installations requiring lower flows including solid set, drip or other low volume irrigation as well as center pivot and other mechanical-move systems. Each regulator maintains a constant preset outlet pressures based on its flow / inlet pressure.
 

Features

  • 100% water tested for accuracy
  • Can be installed above or below ground
  • Maximum flow path resists plugging
  • Very low hysteresis and friction loss
  • Backed by 2-year warranty on materials, workmanship and performance
  • Pressures: 12-35 psi (0.83-2.41 bar)
  • Flows: 0.1-8 gpm (23-1817 L/hr)
  • Inlet sizes: 3/4'' F NPT
  • Outlet sizes: 3/4'' F NPT

 



Senninger's Medium Flow Pressure-Master Regulator
is ideal for installations requiring mid-range flows including solid set, drip or other low volume irrigation as well as center pivot and other mechanical-move systems. Each regulator maintains a constant preset outlet pressure based on its flow / inlet pressure.

Features:

  • 100% water tested for accuracy
  • Can be installed above or below ground
  • Maximum flow path resists plugging
  • Very low hysteresis and friction loss
  • Backed by 2-year warranty on materials, workmanship and performance
  • Pressures: 12-35 and 50 psi (.83-2.42 and 3.45 bar)
  • Flows: 2-20 gpm (454-4543 L/hr)
  • Inlet sizes: 3/4'' F NPT, 1'' F NPT, 1'' F BSPT
  • Outlet sizes: 3/4'' F NPT, 1'' F NPT, 1'' F BSPT

 



Senninger's Pivot Special Regulator
is designed to handle flows along the length of a center pivot or other mechanical-move system. Each regulator maintains a constant preset outlet pressure based on its flow / inlet pressure.

Features:

  • 100% water tested for accuracy
  • Maximum flow path resists plugging
  • Very low hysteresis and friction loss
  • Backed by 2-year warranty on materials, workmanship and performance
  • Tamper-proof housing
  • Pressure: 10 psi (.69 bar)
  • Flows: 0.5 to 15 gpm (114 to 3407 L/hr)
  • Inlet size: 3/4'' F NPT
  • Outlet size: 3/4'' F NPT

 



** Note: With no flow through the regulator, the inlet and outlet pressures will be the same.

 


 

Caution:

Always install pressure regulators downstream from all shut-off valves.

For the Low Flow and Medium Flow, be sure to install pressure regulators in the proper direction. The arrow on the upper housing shows the direction of the flow and should always point downstream toward applicators.

Write Your Own Review
You're reviewing:Senninger's Pressure Regulator