Piston Filtomat Automatic Filter - Amiad

In stock
ITEM#
IB FILT M104LP-config

Shipping cost evaluation is required for some of the products.

Water is filtered through the inlet and is pre-filtered through the coarse screen and then filtered through the fine screen. From there it is passed to the outlet and as filtration cake is accumulated on the inner surface of the fine screen pressure differential builds up.

Read More
USD$12,078.5840
Share by email
Product No. Description Max.
Flow Rate
Max.
Pressure
Filtering
Surface Area
Backflush water
per flush cycle
Inlet-Outlet
Diameter
Wuight
(empty)
Quote required
IB FILT M104LP 4" Automatic Filter 792 USgpm
180m³/h
150 psi
10 bar
698 in²
4500 cm²
33 USgal
125 liters
4"
100mm
198 lb
90 kg
X
IB FILT M106LP 6" Automatic Filter 792 USgpm
180m³/h
150 psi
10 bar
698 in²
4500 cm²
33 USgal
125 liters
6"
150mm
253 lb
115 kg
X
IB FILT M106XLP 6" Extra Automatic Filter 1760 USgpm
400m³/h
150 psi
10 bar
1054 in²
6800 cm²
40 USgal
150 liters
6"
150mm
264 lb
120 kg
X
IB FILT M108LP 8" Automatic Filter 1760 USgpm
400m³/h
150 psi
10 bar
1054 in²
6800 cm²
40 USgal
150 liters
8"
200mm
308 lb
140 kg
X
Filtering process:

Water is filtered through the inlet and is pre-filtered through the coarse screen and then filtered through the fine screen. From there it is passed to the outlet and as filtration cake is accumulated on the inner surface of the fine screen pressure differential builds up.


Self-cleaning process:

The M100 piston filters will start the self-cleaning process when the pressure differential across the screen reaches a preset level. At a preset level, the rinse controller opens the flushing valve creating a strong backflush stream through the drainage to the atmosphere. This ackflush creates a suction effect at nozzles, cleaning the face of the fine screen directly in front of the nozzle openings. Backflush water low flows through collector pipe via hydraulic rotor To the flushing valve, causing the dirt collector assembly To spin. Pressure drop in the rotor assembly and drainage of the piston forces the collector assembly into axial movement. The combined spin and axial movements ensure that the suction nozzles sweep the entire screen area. When flushing is completed, a second flushing cycle is automatically triggered, pushing the collector assembly to its original position. The combined flush cycle takes 10-15 seconds.

More Details: www.amiad.com
Write Your Own Review
You're reviewing:Piston Filtomat Automatic Filter - Amiad