Anti-Leak Fogger Low Flow

In stock
ITEM#
IS JD101003673-config
USD$2.92
Share by email
Product No. Flow Rate Opening Pressure
(HP)
Closing Pressure
(HP)
Recommended
Pressure
Distance
Between
Fogger
Distance
Between
water lines
Distance Between
the Fogger and the plantation
IS JD101003675 3.1 GPH 50 PSI 20 PSI 50 to 72 PSI 3' (0.90 m) 4' (1.22 m) 18'' to 30''
(45.72 to 76.2 cm)
IS JD101003673 6.1 GPH 50 PSI 20 PSI 50 to 72 PSI 3' (0.90 m) 4' (1.22 m) 18'' to 30''
(45.72 to 76.20 cm)

The fogger allows for the adequate irrigation of cuttings and germinating seeds. This versatile device maintains the humidity level and evapotranspiration conditions, or it may be used as cooling system in greenhouses and high tunnels.

Given its unique vortex flow, the fogger spreads extremely fine droplets, even at very low flows. The fogger is equipped with an anti-drip mini-valve; therefore, once the irrigation system is shut off, there is no more flow.

Use

Install the first and last irrigation line 1.5' from the edge of the surface to be irrigated. Afterwards, allow 4' spacing between the lines to uniformly cover the surface.

For maximum efficiency, install the fogger at a height between 18" and 30" from the planting level, all the while respecting a 3' spacing between foggers on a same line.

When using four-way foggers, their positions must be alternated between 45˚ and 90˚ so to adequately cover the entire surface to be irrigated and avoid water ponding in a certain zone to the detriment of another (see the "tips" tab).

Advantages and Specifications

  • In average, the FLF is spreading 70 micrometres (2.75 mil) droplets.
  • Humidity and temperature control
  • Rotary droplet spray
  • 5.4-10.5 Lph (1.4-2.77 gph)

How to install the fogger

Foggers configuration

Write Your Own Review
You're reviewing:Anti-Leak Fogger Low Flow