|Black Polymiade Wire||40,5 m
EzWire Black Polyamide Wire Coil is high-tensile polyamide (PA6) monofilament with low elongation, compact cross section and high breaking strength. The monofilament is ideal for orchards, vineyards, shade covers, netting, and fencing. Lift wire for vines or other plants, ideal to attach on it irrigation tubes, etc.
At the time of installation, it is strongly suggested that the tensioning of the polyamide yarn does not exceed 3% of the total length of the row.
For example, if the row is 330 ft. (100 m) long, the power up should not exceed 10 ft (3 m).
The EzWire black Polyamide wire coil can be attached to the first anchor post by a recommended knot. The line should then be rolled out towards the opposite end of the vineyard row. Attach a ire puller to the line, stretch 3-5% of row length, secure and tie to end post, then release wire puller from line. The Line will now be properly tensioned. The Polyamide wire can be fastened to intermediate posts with staples or other means incorporating plastic grommets. No additional equipment is required.