133' Black Polyamide Wire Coil - EzWire

Out of stock
ITEM#
FILPOLY-2,5SX133
CAD$19.95
Share by email
Description Lenght Diameter Gauge Coil Weight
Black Polymiade Wire 40,5 m
133'
2,5 mm
0,0984''
12,5 300 gr
0,68 lb

EzWire Black Polyamide Wire Coil is high-tensile polyamide (PA6) monofilament with low elongation, compact cross section and high breaking strength.  The monofilament is ideal for orchards, vineyards, shade covers, netting, and fencing. Lift wire for vines or other plants, ideal to attach on it irrigation tubes, etc.

 

Features

  • High-tensile polyamide (PA6) monofilament with low elongation
  • Breaking elongation: approx. 20% to 24%
  • Support long-term temperatures:  from - 40º C to + 50º C
  • UV and Chemical Resistant
  • Lightweight and safe
  • Maintenance and corrosion free
  • Non conductive, high insulation
  • Easy installation, no springs, tensioners or rachets required to maintain tension
  • Other applications: support hail protection, greenhouses, horse fencing, etc.

 

At the time of installation, it is strongly suggested that the tensioning of the polyamide yarn does not exceed 3% of the total length of the row.


For example, if the row is 330 ft. (100 m) long, the power up should not exceed 10 ft (3 m).

    INSTALLATION

    The EzWire black Polyamide wire coil can be attached to the first anchor post by a recommended knot.  The line should then be rolled out towards the opposite end of the vineyard row.  Attach a ire puller to the line, stretch 3-5% of row length, secure and tie to end post, then release wire puller from line.  The Line will now be properly tensioned. The Polyamide wire can be fastened to intermediate posts with staples or other means incorporating plastic grommets. No additional equipment is required.

    Brochure polyamide wire

    Brochure polyamide wire
    Write Your Own Review
    You're reviewing:133' Black Polyamide Wire Coil - EzWire
    Your Rating