IRRIGATION
PLASTICULTURE
CONTAINERS
Bioplus Residential Equipment
Free shipping on orders over $200
(0)

Shop by category

Shop by category

Amiad semi-automatic cleaning Scanaway option

Starting at:
$435.00
Starting at:
$435.00

In stock

Semi-automatic cleaning Scanaway option

  • Semi-automatic cleaning Scanaway option
  • Illustration Scanaway Option
Amiad Water Filter
Product No. Description Max. Pressure Min. Pressure during cleaning
11-2223-61002'' Scanaway150 PSI
10 bar
29 PSI
2 bar
11-3023-61003'' Scanaway150 PSI
10 bar
29 PSI
2 bar

Features

  • Simple turn-of-a-handle cleaning of the filter screen
  • Eliminates the need for turning off the water and extracting the filter screen for rinsing
  • No interruption of the process water flow during cleaning
  • Low pressure loss
  • Available as an upgrading kit for Amiad manual filters from 2”-14”
  • Fitted with a “Clogging Indicator”

Option

This product may be added as an option when purchasing a pump equipped with an Amiad plastic filter.

An upgrade is also possible by adding the semi-automatic cleaning option, which was not originally part of your filtration system in the pump unit. This product is compatible with 50-350 mm (2-14”) Amiad filters. 

General

Amiad’s exclusive Semi-Automatic assemblies provide a quick and efficient way for cleaning manual filters. Amiad’s Scanaway and Brushaway are add-on assemblies built for upgrading Amiad’s steel and plastic filters to semi-automatic operation by adding simple turn-of-a-handle cleaning mechanism to the filter’s screen.  Upgrading a manual filter to semi-automatic operation eliminates the need for turning-off the water and extracting the filter screen for rinsing, with the semi-automatic assembly the process flow is not interrupted during operation. Amiad’s semi-automatic assemblies are fitted with a Clogging Indicator for visually monitoring the status of the filter element without disrupting the water flow. A red button pops-up from the indicator when the differential pressure across the screen reaches 0.5 bar. Amiad’s semi-automatic assemblies are available for all Amiad manual filters from 2” to 14” (50 à 350 mm).

 

How the “Scanaway” Assembly Works

The Scanaway assembly consists of a suction-scanner, a hollow pipe with suction nozzles, that is facing the inner side of the screen.Outside the filter a handle is connected to the “suction” scanner, allowing turning of the scanner in a spiral movement so it rotates inside the screen surface without touching the screen mesh.Opening the exhaust valve at the filter lid creates low pressure conditions in the suction scanner, which cause the scanner nozzles to suck-in the dirt particles from the screen surface and expel the dislodged particles out through the exhaust valve.Scanning is done during the filtration process without having to stop the flow of process water through the filter

 

How the “Clogging Indicator” Works

The Clogging Indicator is a special feature mounted on the filter pressure check points and acts like a “traffic light”. When the pressure differential across the screen reaches a pre-set value of 0.5 bar the red button of the Clogging Indicator pops-up to visually indicate that the filter needs cleaning.

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
General appreciation